Remark: The camshaft sprocket in this timing chain kit only works with the NGC power control module. There are two types of PCMs (Powertrain Control Module): JTEC and NGC. JTEC is the older controller, and NGC is the newer controller. There is an easy way to tell the two apart: an NGC PCM has four connectors on it because it integrates the TMC (Transmission Control Module), while the JTEC has three connectors on it because it uses a separate TCM. Please make sure that your engine has the NGC controller before making the purchase.This item includes:1 Cam sprocket (right-hand side)1 Cam sprocket (left-hand side)1 Crank sprocket1 Idler sprocket primary1 Idler sprocket secondary1 Timing chain primary (70 link)2 Timing chain secondary (106 link)1 Tensioner primary1 Tensioner (right-hand secondary)1 Tensioner (left-hand secondary)2 Guide secondary2 Tensioner arm secondary1 Oil Pump1 Water Pump w/ Gasket1 Timing Cover Gasket Set1 Silicone SealantCompatible With / Replacement For Following Models:2007 DAKOTA 4.7 285CID V8 FLEX SOHC 16V VIN "P" - NGC DESIGN2002-2004 DAKOTA 4.7 285CID V8 SOHC 16V VIN "N" - NGC DESIGN2005-2007 DAKOTA 4.7 285CID V8 SOHC 16V VIN "N, J" - NGC DESIGN2006-2008 DURANGO 4.7 285CID V8 FLEX SOHC 16V VIN "P" - NGC DESIGN2003-2008 DURANGO 4.7 285CID V8 SOHC 16V VIN "N" - NGC DESIGN2007 RAM 1500 4.7 285CID V8 FLEX SOHC 16V VIN "P" - NGC DESIGN2005-2007 RAM 1500 4.7 285CID V8 SOHC 16V VIN "N" - NGC DESIGN2003-2004 RAM 1500 4.7 V8 SOHC 16V VIN "N" - NGC DESIGN2006 COMMANDER 4.7 285CID V8 SOHC 16V VIN "N" - NGC DESIGN2005-2006 GRAND CHEROKEE 4.7 285CID V8 SOHC 16V VIN "N" - NGC DESIGN2006-2007 RAIDER 4.7 285CID V8 SOHC 16V VIN "N" - NGC DESIGN